Most Popular Siboasi S4025A Badminton feeding machine -Top Model :
| Model Number: | Siboasi S4025A top badminton training machine (with battery)–Top Model | Accessories: | Battery set / remote control /power cord |
| Product size: | 122CM *103CM *240-305CM (Max.Height:305cm) | Machine Weight: | it is in 31 kgs-net weight |
| Suitable for : | all kinds of shuttles ( Both feather ones /plastic ones are ok ) | Power (Electricity): | Different countries: 110V-240V AC POWER are available |
| Ball capacity: | 180-200 shuttles | Type: | Automatic shooting |
| Machine Power: | 360 W | Packing measurement: | 55*50*45CM /29*22*145CM/65*31*32CM(After Carton box Packing) |
| Warranty: | Two years Warranty for clients | Packing Gross Weight | 54 KGS -packed ( 3 CTNS) |
Parts list(Standard) for Clients :
- 1.Remote control 1pcs
- 2. One pair of battery for remote control
- 3.Lithium battery 1pcs
- 7.Square pin of shuttles holder 1pcs
- 5.AC and DC cord 1pcs
- 8.Shuttles holder 1pcs
- 6. 12VDC battery charger 1pcs
- 9.Spanner 1pcs
- 10.Allen wrench 2pcs
- 11.Tripod 1pcs
- 12.Manual 1pcs
- 13.Warranty card 1pcs
Remote control introduction:
- 1. Power button： Long press switch button for 3s to start, 3s to turn off.
- 2. Start/Pause button：Press once for pause, once again for re-work.
- 3. Fixed mode F button：(1)Press ” F ” button to enter into fixed point mode,
- 1 default point ;(2)Long press the ” F ” button on the remote control for 3
- seconds to save the programmed fixed-point parameter;(3)Long press the ” F “
- buttonof the remote control for 8 seconds, and the default parameters of the
- remote control will be restored to the factory setting.
- 4. Combination mode button ：(1)Press the “combination mode” button to
- enter the combination mode. The equipment serves according to the point
- position displayed on the remote control. In this mode, Frequency, Front court
- speed,back court speed and lifting can be adjuste；(2)Press the first square ball;
- Press the second medium shallow square ball; Press the third medium deep
- square ball; Press four vertical two-point cycles.
- 5. Horizontal cycle button:Short press the horizontal cycle key of the remote
- control, and press the horizontal random cycle for the first time; For the
- second time, press the wide two-point ball cycle; Press the middle two-point
- ball cycle for the third time;Press the narrow two-point ball cycle for the fourth
- time; Press the three-point ball cycle for the Fifth time; Press the front court ball horizontal random for the sixth time;Press the back court ball horizontal
- random cycle for the seventh time.
- 6. Random / program button：(1)Short press “random / program “
- on the remote control to enter the random serve of the whole court. In this
- mode, the serve speed and frequency can be adjusted, the number of balls can not be adjusted.(2) Short press “random / program” on the remote
- control for the second, third and fourth times to switch the default three groups of programming settings. Speed, frequency and ball count can be adjusted.
- (3)Long press ” user-defined programming mode. You can set up 21 landing points in the field. random / program” on the remote control to enter the
- Press the up, down, left and right keys to adjust the landing point position, press ” F ” key to confirm, press Cancel again, long press to cancel all
- programming landing points. Short press “random/program” button to save
- and exit the programming mode.
- 7. Cross cycle button：Press “cross loop” on the remote control, and
- the medium shallow left deep ball for the first time; Press the medium deep press left shallow ball for the second time; Press the medium deep right
- shallow ball for the third time; Press the medium shallow right deep ball for the
- fourth time; Press the left deep right shallow ball for the fifth time; Press
- the left shallow right deep ball for the sixth time.
- 8. Front court speed+/- button：when the lifting is 1, gears 1-5grade
- adjustable; when the lifting is 2, 1-6 grade adjustable.
- 9. Back court speed+/- button：1-5 grade adjustable.
- 10.Frequency +/- button：1-9 grade adjustable.
- 11.Machine up/down button： (display 1 is down and display 2 is up) Adjust the height of the head.
- 12.Number of balls button： (Ball count 1-10 optional) Adjust the number of placement serves.
APP Introduction:
- 1. Download and install “SS-Link” APP.(Note: Scan the QR code on themanual to download and install.)
- 2. Turn on the bluetooth.
-
3. Open ” SS-Link”,it would scan the current available devices automatically.(Picture 1)
-
4. Click”SS-S4025A…” to connect with machine, it will enter to APP operation page. (Picture 2)
Programming mode operation steps
1 .Point ” add program”, enter the self-defined programming name, and then click ” ” on the screen to select the ball dropping point,
Then point “save “.(Picture 3、4、5、6)
2.Click the ” mode ” of the program just edited and saved, and then set the number of balls. (Picture 7)
front court speed, back court speed, frequency, rise and fall and the
3.Click “control” to return to the main operation interface.
Reviews from SIBOASI clients :
Siboasi factory contact directly :
- sukie@siboasi.com.cn
- Whatsapp/Wechat: +86 136 6298 7261
Post time: Aug-01-2025